Kichler 2666 Bedienungsanleitung PDF herunterladen

1) Turn off power.

2) Determine the height from ceiling that you would like your fixture to

hang. Fixture is provided with (3) 292mm (11 1/2”) long tubes that

can be used or omitted to achieve desired height.

3) Assemble stem to fixture — First read and understand directions on

thread locking compound marked on illustration.

NOTE: Thread locking compound must be applied to all stem

threads as noted by symbol () to prevent accidental rotation of

fixture during cleaning, relamping, etc.

4) Please note direction of exposed threaded pipe on illustration.

Bottom two pipes will have exposed thread at top. top pipe will not

have exposed threaded pipe.

5) Take large diameter threaded pipe form parts bag and screw into

hangstraight a minimum of 1/4’. Lock into place with a hexnut.

6) Run a hexnut down threaded pipe almost touching first hexnut. Now

screw threaded pipe into mounting strap. Mounting strap must be

positioned with extruded thread faced into outlet box. Threaded

pipe must protrude out the back of the mounting strap.

7) To correctly position mounting strap and threaded pipe, put mount-

ing strap on flat surface and place canopy over top. Approximately

one-half of the hangstraight exterior thread should be exposed.

Tighten hexnuts against mounting strap and hangstraight.

8) After the desired position is found, tighten the hexnut up against the

bottom of the mounting strap.

9) Carefully slip lock ring, then canopy over assembled tubes on fix-

ture.

10) Thread assembled hangstraight and mounting strap into top tube on

stem assembly.

11) Attach assembled fixture to outlet box. (Screws not provided).

12) Connect ground wire from fixture and ground wire from outlet box in

outlet box

11) Make wire connections (connectors not provided). Reference chart

below for correct connections and wire accordingly.

12) Push canopy to ceiling and secure in place with lock ring.

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

OUTLET BOX

MOUNTING STRAP

HEXNUT

THREADED PIPE

HANGSTRAIGHT

LOCK RING

THREADED PIPE

CANOPY

EXPOSED THREAD

TUBE

Date Issued: 1/15/93 IS-2666-CB

INSTRUCTIONS

For Assemblin

and Installin

Fixtures in Canada

Inhaltsverzeichnis

Seite 1

1) Turn off power.2) Determine the height from ceiling that you would like your fixture tohang. Fixture is provided with (3) 292mm (11 1/2”) long tube

Kommentare zu diesen Handbüchern

Keine Kommentare

Kichler 2666 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Kichler 2666 herunter. Kichler 2666 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Kichler 2666