Kichler 10579 Bedienungsanleitung PDF herunterladen

FIXTURE HOUSING

CHANNEL

PLASTIC FACE

(THIS END FIRST)

PLASTIC FACE

CHANNEL

FIXTURE

HOUSING

1) Determine desired location for mounting fixture. When

doing this keep in mind distance from fixture to receptacle and

that mounting surface should be a minimum of 1/2” thick..

2) Hold fixture housing in desired mounting position and mark

position of keyholes. Put fixture housing down and start

screw at marks.

3) Slip large portion of keyhole over screwheads and push fixture

to one side. This will allow both hands freedom for tightening

screws.

4) Insert recommended bulbs, if removed.

6) Plastic face of diffuser has a slight lip.

Insert lip into channel at front of fixture

housing.

7) Swing diffuser up towards fixture housing

until diffuser snaps into place.

8) Plug fixture into receptacle.

9) To remove diffuser: Place thumbs on diffuser face and finger

tips on lip between diffuser face and diffuser glass. Apply

slight pressure to diffuser face with thumbs and pull fingers

toward thumbs.

IS-10579-BL

Seite 1

FIXTURE HOUSINGCHANNELPLASTIC FACE(THIS END FIRST)PLASTIC FACECHANNELFIXTUREHOUSING1) Determine desired location for mounting fixture. When doing thi

Keine Kommentare

Kichler 10579 Bedienungsanleitung